Transparent PVC pipe is a kind of pipeline product, which has many characteristics such as high heat resistance, good toughness, and strong ductility. It is widely used in our daily life. Pipes in many places choose to use transparent PVC pipes. It also shows that the quality of the PVC pipe and transparent pvc pipe fittings is very good.
1. Advantages of transparent PVC pipe from Verygreen clear pvc pipe supplier
1. It has good tensile and compressive strength: but its flexibility is not as good as other plastic pipes.
2. Small fluid resistance: The wall of transparent PVC pipe is very smooth, and the resistance to fluid is very small. Its roughness coefficient is only 0.009, and its water delivery capacity can be increased by 20% compared with cast iron pipe of the same diameter, and increased by 40% compared with concrete pipe. .
3. Excellent corrosion resistance and chemical resistance: transparent hard pipe has excellent acid resistance, alkali resistance, corrosion resistance, and is not affected by moisture and soil pH, and does not require any anti-corrosion treatment when laying pipes.
4. Good water tightness: The installation of transparent PVC pipes has good water tightness no matter it is connected by bonding or rubber ring.
5. Anti-biting: The transparent PVC pipe is not a source of nutrition, so it will not be eroded by rodents.
2. What are the precautions for the construction of transparent PVC pipes?
1. When the small-diameter pipe is bonded with solvent, the socket must be rounded to form a bevel, and the fracture must be flat and vertical to the axis, so that the bond can be firm and avoid water leakage.
2. Generally, transparent pipe fittings with a pipe diameter greater than or equal to 100 mm use a rubber ring interface. Before installation, personnel must be arranged to chamfer the socket of the pipe, and check whether the quality of the rubber ring is qualified. The socket, rubber ring, etc. must be wiped clean during installation.
3. The trench excavation of traditional pipeline installation only requires that the pipeline can be put into the trench and sealed. When the original soil layer is not loosened, it is not necessary to pressurize and tamp the cushion.
4. Generally, branch pipes of transparent PVC pipes can be opened by tees or vertical water stoppers. A saddle-shaped fitting and half a two-in-one tee can be added during construction, and clamped with U-shaped bolts, so that the pipe wall is thickened, and then directly drill holes and open teeth on the top, and then connect it with external threaded plastic parts. The test shows that the pressure test and acceptance after construction with this method can fully meet the requirements of the specification. In addition, thrust piers should be installed at the positions where the water flow in the pipe generates thrust, such as elbows, tees, and pipe end sealing plates, to withstand the thrust of the water flow.
5. As a new type of non-metallic pipe, the transparent PVC pipe cannot detect its specific location with the existing metal pipe detection equipment, but this problem can be easily solved by laying an electric wire on the pipe when the pipe is buried.
English
